CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 24

4.5 Assembling basic version (for Long shield holes)
Page 24 of 141
5. Insert the
SQUARE SPINDLE
Make sure that the elongated hole is level.
Make sure that the ball of the square spindle in the
drill hole latched in the coupling follower.
6. Feed both cables into the
7. Run the cables with the help of the
through the corresponding screw hole in the door.
- Turn the installation tube to and fro slightly while feeding
it in, so that it moves forwards more easily.
in the coupling follower.
tube.
INSTALLATION
INSTALLATION TUBE
Long shield ILS