CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 41

Long shield ILS
4.6 Assembly Option S (for Short shield holes)
b) In case no Euro profile cylinder is assembled, then the
spring clip will be assembled. Put the
and on the lower
NUTS FIXING SCREWS
6. Tighten by hand.
NUTS
While tightening the
the cables upwards, so that these are not jammed!
7. Loosen the grub screw from the
slightly to remove any potential mechanical
HANDLE
stress from the spindle.
SQUARE
8. Check whether the handle set is correctly aligned.
,
SPRING CLIPS WASHERS
.
FIXING SCREW WITH CABLE SLIT
INSIDE LEVER
Page 41 of 141
hold