CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 25

Assembly on the inside of the door
Long shield ILS
4.5 Assembling basic version (for Long shield holes)
8. Pull the
INSTALLATION TUBE
door.
9. Guide the
OUTSIDE FITTING
of the door. Push the square spindle through the lock
follower.
While guiding, keep the cables tout so that they lie
correctly in the cable slit. The cables must not get
squeezed or jammed!
10. Align the Euro profile cylinder, if it does not sit
correctly in the outside fitting.
The outside fitting is now temporarily fixed, so that you
can continue with assembly of the inside fitting.
Depending on the size of the lock follower, you may
possibly need adaptor sleeve for the square spindle
(see "Adaptor sleeves for square spindle"
page 18). Use adapter sleeves in this case.
on the opposite side of the
through the Long shield holes
on
Page 25 of 141