CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 51

Long shield ILS
4.7 Assembling wide shield (for rosette-holes)
3. Remove the fixing rings from all
4. Insert the other two
FIXING SCREWS WITHOUT CABLE SLITS
the lower elongated holes of the
.
OUTSIDE SHIELD
5. Place the fixing rings on the on both the lower
and push it up to the assembly plate to fix it in
SCREWS
the position the matches the existing holes.
6. Insert a
FIXING SCREW WITHOUT A CABLE SLIT
rosette hole and the
FIXING SCREW WITH CABLE SLIT
right rosette hole of
ASSEMBLY PLATE OF OUTSIDE SHIELD
Ensure that the cables run through the grooves on
the edge.
Make sure that the cable slit of the fixing screw
faces upwards and the cables lie exactly in the cable
slit.
.
FIXING SCREWS
in
ASSEMBLY PLATE OF
FIXING
in the left
in the
.
Page 51 of 141