Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
5.11 Performing a software update
To perform a software update:
1.
Download the latest software version from Duerkopp Adler's
website (https://software.duerkopp-adler.com/
maschinenprogramme.html).
2.
Save the file to a USB key.
Fig. 77: Performing a software update
①
②
(1) - POWER LED
(2) - USB port
3.
Switch on the machine at the main switch (3) ( p. 20).
The machine is ready for operation when only the POWER
LED (1) is lit.
4.
Insert the USB key into the USB port (2).
The software update starts. The LEDs on the control light up
in alternating fashion.
The update is complete when only the POWER LED (1) is lit
after a few minutes.
The machine is ready for sewing.
Information
Before disconnecting the USB key from the control, switch off the
machine at the main switch (3).
③
(3) - Main switch
123