Checking The Hook Lubrication - DURKOPP ADLER 550-12-33 Operating Instructions Manual

Maintenance
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Checking the oil level
Proper setting
The oil level must always be between the minimum level
marking (1) and the maximum level marking (2) at the inspection
glass.
Topping off the oil reservoir
To top off the oil reservoir:
1. Fill oil through the filler hole (3) to a maximum of 2 mm below
the maximum level marking (2).
6.3.2

Checking the hook lubrication

NOTICE
Property damage from incorrect oil level!
Too little or too much oil can cause damage the machine.
Top off oil as described.
Fig. 80: Checking the hook lubrication (1)
①
②
(1) - Screw plug
(2) - Hook drive housing
Hook drive housing (2) and screw plug (1) can be accessed under
the right hook cover (4).
(3) - Dipstick
(4) - Right hook cover
④
③
131