DURKOPP ADLER 550-12-33 Operating Instructions Manual page 96

94
Adjusting the parameters on the display
You can adjust the following parameters for the entire seam
program directly on the display:
Symbol Meaning
Ruffling type and ruffling value
The ruffling type and the ruffling value are shown on the
display.
Caution: While it cannot be selected, this selection can be
changed.
• To select the ruffling type, press the
•
•
•
• To change the ruffling value, press the numeric button/s.
Stitch length
Value range: 3.0 – 6.0 mm

• Use

• Use
Needle thread tension
Value range: 1 – 99

• Use

• Use
◄/►
11. Use to switch to the
▲/▼
12. Use or the numeric buttons to adjust the value.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
: Ruffling top and bottom
: Ruffling top
: Ruffling bottom

/ to select the parameter.

/ to change the stitch length.

/ to select the parameter.

/ to change the needle thread tension.
/
Programming
button.
selection.