Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
◄/►
11. Use
to switch to the
12. Confirm with OK.
The seam section menu appears.
▲/▼
13. Use
to select the desired parameter of the first seam
section.
14. Press the OK button to activate or deactivate the parameter
▲/▼
or use
to edit the value, enter new values using the
numeric buttons and confirm the change by pressing OK.
Use ◄
to exit the submenu.
The changed values are stored immediately.
15. To exit the seam section menu, press the ESC button.
The changed values are stored immediately.
16. Insert the sewing material.
17. To sew the 1st seam section up to the desired position, press
the pedal forward to position 1.
Information
If you already entered a number of stitches for this seam section
in the seam section menu, the stitches sewn now will be added
to this value.
The only way to correct/adjust this new number of stitches is by
using the seam section menu.
Setting softkey functions for the current seam section
18. Press the lower softkey to switch a softkey function on or off.
The softkey menu opens.
19. Switch the following softkey functions on and off as needed
for the current seam section in the softkey menu:
• Stitch count (button 1)
• Tape tensioner (button 2)
• Edge cutter (button 3)
Every softkey function that is struck through is deactivated.
selection.
87
Advertisement
Table of Contents
