72
Assigning a softkey function to the upper softkey (1)
Information
The upper softkey can only be assigned one new softkey function
at a time.
To assign a softkey function to the upper softkey (1):
1.
Press button 1/2/3/4/5 under the desired softkey function and
the upper softkey (1) at the same time.
The function is assigned to the upper softkey (1) and can
subsequently be called up using this softkey.
Removing a softkey function from the upper softkey
To remove the softkey function from the upper softkey:
1.
Press the upper softkey (1) and button 6 at the same time.
The upper softkey (1) is no longer assigned a function.
5.3.3
Sewing in manual mode
To sew in manual mode:
Sewing without ruffling
1.
Press button 0 to set the ruffling value to 0.
2.
If necessary, change values such as stitch length and thread
tension.
3.
Press the pedal forward to position 1 and sew.
Information
If the seam is not entirely smooth, adjust the stretch value for the
ruffling value of 0 ( p. 113).
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Programming