Copying A Seam Program - DURKOPP ADLER 550-12-33 Operating Instructions Manual

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
5.6.5

Copying a seam program

The selected seam program is copied into a new seam program
number.
To copy an existing seam program:
1. Select the seam program in automatic mode that you wish
to copy ( p. 79).
2. Press the P button.
 The display switches to:
Fig. 65: Copying the seam program (1)
 P flashes.
3. Press the lower softkey
 The softkey menu appears on the display:
Fig. 66: Copying the seam program (2)
4. Press the
 The display shows the next available seam program number
under which the seam program can be stored:
Fig. 67: Copying the seam program (3)
5. Confirm the seam program number with OK.
.
button.
105