140
7.3
Assembling the reel stand
A fully assembled reel stand is included and must be assembled
to the tabletop.
Fig. 86: Assembling the reel stand (1)
(1) - Washer
(2) - Nut
To assemble the reel stand:
1.
Place a washer (1) onto the hole in the tabletop.
2.
Screw in a nut (2) until you reach the end of the thread.
3.
Insert the reel stand tube (3) through the washer (1) and into
the hole in the tabletop.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
(3) - Reel stand tube
Setup
③
②
①