DURKOPP ADLER 550-12-33 Operating Instructions Manual page 106

104
Symbol Description
Maximum speed (Max Speed)
• Set maximum speed
Edge cutter (Edge Trimmer)
• Activate/deactivate the edge cutter
◄/►
6. Use to switch to the
▲/▼
7. Use to select the seam section you wish to edit.
 The selected seam section is shown in bold in the program
bar.
8. Confirm with OK.
 The seam section menu opens.
▲/▼
9. Use to select the desired parameter.
10. Press the OK button to activate or deactivate the parameter
▲/▼
or use to edit the value, enter new values using the
numeric buttons and confirm the change by pressing OK.
Use ◄
to exit the submenu.
 The changed values are stored immediately.
11. To exit the seam section menu, press the ESC button.
 The parameters edited for the seam section are stored.
Exiting edit mode
12. To exit edit mode, press the ESC button.
 The seam program is saved.
The machine switches to automatic mode, and the edited
seam program is selected and can be sewn right away.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Programming
selection.