Table of Contents
Advertisement
Operation
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
4.6.2
Threading the reinforcement tape from
the bottom
Fig. 14: Threading the reinforcement tape from the bottom (1)
①
②
③
④
⑤
(1) - Slot in the oil pan
(2) - Tape guide
(3) - Screw
To thread the reinforcement tape from the bottom:
1.
Loosen the screw (5) and pull it off the bar (6) towards the left
together with the brake element (4).
2.
Fit the tape roll onto the bar (6).
3.
Slip the brake element (4) back onto the bar (6).
4.
Tighten the screw (5).
Now, the tape roll can no longer slip off the bar.
5.
Use the screw (3) to set how strongly the tape roll is supposed
to be braked ( p. 46).
6.
Feed the reinforcement tape up from the tape roll to the tape
guide (2) and thread it.
7.
Tilt the machine head ( p. 148).
8.
Feed the reinforcement tape up through the slot in the oil
pan (1).
⑥
(4) - Brake element
(5) - Screw
(6) - Bar
33
Advertisement
Table of Contents
