Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
5.2
Control operating modes
The control offers several different modes:
• Manual mode ( p. 66)
Manual mode is the simplest operating mode (seam program
number 000).
There are no seam programs and no seam sections in
manual mode.
Any changes made to parameters (e.g. stitch length or
thread tension, etc.) are applied immediately during the
sewing process.
• Automatic mode ( p. 74)
Automatic mode allows for the execution of seam programs
(seam program number 001 – 999).
The seam programs are divided into individual seam sections.
Each section is assigned its own specific parameters, e.g.
ruffling value, needle thread tension, etc.
Ruffling value and needle thread tension can be altered at any
time during the sewing process without effecting any
permanent changes to the seam program.
• Programming mode ( p. 83)
Programming mode allows for the teaching of new sewing
programs.
• Edit mode ( p. 90)
In Edit mode, new sewing programs can be created, edited,
deleted, copied and mirrored (right or left piece).
• Service mode
Service mode offers, for instance, functions such as changing
the language. For more information on service mode, refer to
the Service Instructions.
Information
The machine is capable of storing up to 999 seam programs with
a maximum of 30 seam sections each.
65
Advertisement
Table of Contents
