DURKOPP ADLER 550-12-33 Operating Instructions Manual page 114

112
Parameter Setting
Initial ruffling
value
(Ruffl. Min.)
Hook thread
tension
(Thr. Tens.
Maximum
Bot)
ruffling value
(Ruffl. Max.)
Tape tension for ruffling support
The parameter Ruffling support (Ruffl. Support) offers
the option of setting the ruffling value at which the tape tensioner
will be switched on automatically ( p. 44):
Parameter Setting
Mode (Mode)
Tape tension
(Tape
Initial ruffling
Tension)
value
(Ruffl.
Min.)
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Function
Set the initial ruffling value from
which the hook thread tension is
supposed to increase.
Value: 0-16
Set the maximum ruffling value up
to which the hook thread tension is
supposed to rise linearly.
Value: 0-16
Function
Set if the tape tensioner will be
switched on automatically starting
with a specific ruffling value.
Value: Off /2. On/Off
Set the ruffling value starting with
which the tape tensioner will be
switched on automatically.
Value: 0-16
Preset: 8
Programming