Table of Contents
Advertisement
148
7.7
Tilting and erecting the machine head
WARNING
Risk of injury from electricity!
Parts of the machine may be energized.
Switch off the machine and disconnect the power
plug.
You can tilt the machine head for maintenance work.
Fig. 93: Tilting and erecting the machine head
(1) - Tilt protection device
Tilting the machine head
To tilt the machine head:
1.
Grab the machine head at the top on the machine arm and
carefully lower it down to the tilt protection device (1).
The tilt sensor locks the machine for as long as the machine
head is tilted. Sewing is not possible during this time.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Setup
①
Advertisement
Table of Contents
