Performing A Sewing Test According To Pattern - DURKOPP ADLER 745-35-10 F Service Instructions Manual

Proper setting
To achieve uniform and displacement-free clamping, the tip of the movable
flap clamp should first strike the stationary flap clamp.
To set the movable flap clamp:
1. Turn the screw (1) to set the clamping force.
Important
The stationary flap clamp (2) must not bend down.
2. If necessary, align the movable flap clamp (3) in raised position with

13.6 Performing a sewing test according to pattern

Fig. 159: Performing a sewing test according to pattern
(10+5) (10+5)
(1) - Flap
(2) - Pocket opening line
Sample calculation
Flap cut
PL1 = PT - NA 1/2
PL1 = 60 - 5 = 55
170
• greater clamping force: turn clockwise
• smaller clamping force: turn counterclockwise
the stationary flap clamp (2).
PT = 60 PT = 60
L1 (3) L1 (3)
Na 1/2 (5) Na 1/2 (5)
15 15 PL1 PL1
PZ PZ
TE TE
(1) (1)
PZ PT
Flap depth
① ②
(3) - Marking lamp L1
Na 1/2
Needle width * 0.5 Pocket opening line
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Feeding device
① ③
TE