Table of Contents
Advertisement
116
5.9.4
Switching automatic progression left/right
side on/off
The machine has been set up at the factory such that a seam
program with program steps for a left and a right side will auto-
matically switch to the other side once the first side has been sewn.
The sides can be sewn immediately one after the other without
the need to adjust the seam program.
This automatic progression can be switched on and off as needed.
To switch the automatic progression on/off:
1.
Open the User configuration menu ( p. 114).
▲/▼
2.
Use
to select the parameter Automatic Forwarding
Side (AutoForwSide).
3.
Confirm with OK.
The submenu opens.
4.
Confirm with OK.
5.
Change the desired value using the
• 0 = Automatic progression is switched off
• 1 = Automatic progression is switched on
6.
To exit service mode, press the ESC button.
The changed value is stored immediately.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Programming
▲/▼
buttons.
Advertisement
Table of Contents
