Mirroring A Seam Program - DURKOPP ADLER 550-12-33 Operating Instructions Manual

108
5.6.7

Mirroring a seam program

The left/right side that has already been programmed is mirrored.
Information
A sideless seam program CANNOT be mirrored.
To mirror a seam program:
1. Select the seam program in automatic mode that you wish to
mirror ( p. 79).
2. Press the P button.
 The display switches to:
Fig. 71: Mirroring a seam program (1)
 P flashes.
3. Press the lower softkey
 The softkey menu appears on the display:
Fig. 72: Mirroring a seam program (2)
Information
If the symbol is not displayed, the seam program is sideless
and cannot be mirrored.
In this case, you will have to select a different seam program that
was created for a left/right piece.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
.
Programming