Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Information
The upper softkey has been assigned the function Count
Stitches. In this example, the stitch count is switched off and,
consequently, struck through. When the switch count is switched
off, the stitches programmed for each seam section during
teaching will no longer be displayed during the sewing of the seam
program.
When the stitch count is switched on, the length of the seam
section is counted down in stitches.
8.
To activate the stitch count, press the upper softkey.
The stitch count is activated and no longer struck through on
the display.
Important
If the number of stitches is still not being displayed in automatic
mode, activate the stitch count in the softkey menu ( p. 76).
Adjusting the parameters on the display
You can adjust the following parameters for the current seam
section directly on the display:
Symbol
Meaning
Ruffling type and ruffling value
The ruffling type and the ruffling value are shown on
the display.
Caution: While it cannot be selected, this selection can
be changed.
• To select the ruffling type, press the
• To change the ruffling value, press the numeric
button/s.
•
: Ruffling top and bottom
•
: Ruffling top
•
: Ruffling bottom
button.
85
Advertisement
Table of Contents
