Table of Contents
Advertisement
44
4.8
Switching the tape tensioner for the
reinforcement tape on/off
Depending on its equipment, the machine may be equipped with
a lower or an upper tape feeder.
Fig. 26: Switching the tape tensioner for the reinforcement tape on/off (1)
①
(1) - Tensioner element (top)
Fig. 27: Switching the tape tensioner for the reinforcement tape on/off (2)
②
(2) - Tensioner element (bottom)
On both tape feeders, the reinforcement tape is fed through a
tensioner element (1)/(2), which can be closed and opened as
necessary.
The tape tensioner is switched off for ruffling values of 0-7.
The tape tensioner is switched on automatically for ruffling values
of 8 and higher; the button (3) will then light up. The tape tensioner
can be switched off at any time.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Operation
Advertisement
Table of Contents
