Table of Contents
Advertisement
66
5.3
Manual mode
Fig. 44: Manual mode
Manual mode is the simplest operating mode, seam program
number 000. It does not contain any input for individual seam
sections. Any changes made to parameters are applied
immediately during the sewing process.
The following table shows the individual symbols of parameters
on the display and the functions of the buttons on the control panel.
When a parameter is selected, its color on the display changes.
When a parameter is changed, its new value is loaded immediately.
Button function and menu items on the display
Symbol
Meaning
Upper softkey, can be assigned a softkey function
p. 70
• Press the upper softkey.
Class 550-12-34 features the symbol of the edge
cutter on the upper softkey, as this function has been
programmed at the factory.
Open the softkey menu p. 70.
• Press the lower softkey.
Seam program number
Value range: 000
000 signifies Manual mode.
• Use
• Use
Or:
• Enter the seam program number directly using one of
the numeric buttons 0 – 9 and press OK to confirm if
necessary.
The control switches to Automatic mode
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
/
to select the parameter.
/
to change the seam program number.
Programming
Advertisement
Table of Contents
