Table of Contents
Advertisement
132
Fig. 81: Checking the hook lubrication (2)
①
(1) - Screw plug
Checking the oil level
To measure the oil level, you will need the dipstick (3) included in
the accessory pack.
To check the oil level:
1.
Keep the dipstick (3) ready.
2.
Open the right hook cover.
3.
Loosen the screw plug (1) on the filler opening.
4.
Insert the dipstick (3) into the hook drive housing (2).
5.
After a few seconds, pull the dipstick (3) out of the hook drive
housing (2).
Fig. 82: Checking the hook lubrication (3)
⑤
(5) - Minimum level marking
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
⑥
(6) - Maximum level marking
Maintenance
Advertisement
Table of Contents
