Assigning A Function To The Knee Button - DURKOPP ADLER 550-12-33 Operating Instructions Manual

118
5.9.6

Assigning a function to the knee button

Fig. 74: Assigning a function to the knee button
①
②
(1) - Toggle switch
The position of the toggle switch (1) indicates whether the function
is switched on or off.
0 = function is switched off
1 = function is switched on
The function assigned to the knee button (2) at the factory is
Set selected ruffling value to 0 and vice versa.
To assign a function to the knee button:
1. Open the User configuration menu ( p. 114).
▲/▼
2. Use to select the Knee parameter.
3. Confirm with OK.
 The submenu opens.
4. Confirm with OK.
5. Select the desired function using the
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
(2) - Knee button
▲/▼
buttons.
Programming