DURKOPP ADLER 550-12-33 Operating Instructions Manual page 73

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Symbol Meaning
Creating a new seam program
• Press button 5
no softkey function assigned (factory setting, button 6)
Go to page 2
• Press button 7
Tape tensioner
• Press button 1
Edge cutter
• Press button 2
Return to page 1
• Press button 7
Opening the softkey menu
To open the softkey menu:
1. Press the lower softkey
 The display switches to:
Fig. 46: Softkey menu and softkey functions in Manual mode (2)
Switching a softkey function on/off
To switch a softkey function on and off:
1. Press button 1/2/3/4/5 under the desired softkey function.
2. To exit the softkey menu, press the lower softkey
.
again.
71