Table of Contents
Advertisement
Setup
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Fig. 89: Setting the working height
①
(1) - Screw (not visible)
To set the working height:
1.
Loosen the 2 screws (2) on the pedal rod.
2.
Loosen the screw (1) on both bars of the stand.
We recommend to seek the assistance of a 2nd person to
complete this step.
3.
To avoid jamming, slide the tabletop in or out evenly at both
sides.
The scales on the outer sides of the stand bars serve as an
adjustment aid.
4.
Tighten the screw (1) on both bars of the stand.
5.
Ensure that the setting of the pedal rod matches the new
working height.
6.
Tighten both screws (2) on the pedal rod.
7.
Set the pedal again ( p. 144).
②
(2) - Screw
①
143
Advertisement
Table of Contents
