Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Adjusting additional parameters in the seam section menu
You can adjust the following additional parameters for the current
seam section:
Symbol
Description
Stitch counter (StitchCount)
Enter the desired number of stitches for the seam section
Value: 0000-9999
Hook thread tension (Thr. Tens. Bot)
Setting the hook thread tension
Maximum speed (Max Speed)
Set maximum speed
Edge cutter (Edge Trimmer)
Activate/deactivate the edge cutter
◄/►
13. Use
to switch to the
▲/▼
14. Use
to select the desired seam section.
15. Confirm with OK.
The seam section menu appears.
▲/▼
16. Use
to select the desired parameter.
17. Press the OK button to activate or deactivate the parameter
▲/▼
or use
to edit the value, enter new values using the
numeric buttons and confirm the change by pressing OK.
Use ◄
to exit the submenu.
The changed values are stored immediately.
18. To exit the seam section menu, press the ESC button.
19. If necessary, repeat steps 12-20 for all other seam sections.
selection.
95
Advertisement
Table of Contents
