Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
The bar is shown fully in bold when the seam section has been
completed.
The following table lists the button functions that can be performed
in the course of the sewing process.
Button/Pedal Function
Open and close the softkey menu, p. 76.
• To open the softkey menu, press the lower softkey.
Next/previous seam section/return to beginning of
/
seam section
Correction of the thread tension
/
0 – 16
Setting the ruffling value 0-16
Notice: There are no buttons 11, 13, and 15. In order
to, for instance, set the ruffling value 11, press the two
adjacent buttons, i.e. button 10 and button 12, at the
same time.
OK
OK
• Press the OK to confirm a selection/open the menu
ESC
Exit the menu
F, S
No function assigned
Arrow button
• Use the arrow button to switch to the next seam
section.
Left button
Switch maximum stroke on and off (quick stroke
adjustment) p. 54
• To switch maximum stroke on/off, press the left
button.
Tape tensioner for the reinforcement tape p. 44
Right button
• To switch the tape tensioner on/off, press the right
button.
3.
Sew the programmed stitches.
81
Advertisement
Table of Contents
