Table of Contents
Advertisement
84
Information
The machine displays only available seam program slots/accepts
only available seam program slots entered numerically.
4.
Confirm with OK.
The display switches to:
Fig. 54: Teaching a new seam program (programming mode)(2)
The new seam program has been created, but does not yet
contain any individual settings.
Defining a sideless/left/right piece
Use to switch to the
5.
6.
If the seam program is intended for a left/right piece, set the
desired side using
L = left piece
R = right piece
If you do not change the setting
new seam program for a sideless piece.
Important
Once the seam program has been saved, this setting can no longer
be changed.
7.
Press the upper softkey Teach-In
The display switches to:
Fig. 55: Teaching a new seam program (programming mode)(3)
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
selection.
▲/▼
.
-
, the machine will create a
Programming
.
Advertisement
Table of Contents
