Conversion; Software Update Of The Control - DURKOPP ADLER 867-M PREMIUM Additional Instructions

Conversion op3000 to commander basic/pro

Hide thumbs Also See for 867-M PREMIUM:

Important

BEFORE converting the OP3000 control panel to the Commander Basic/Pro

control panel, the control must be updated to the latest software version (at

least version A04.40). This is the only way the new control panel can be rec-

ognized and used by the control after the conversion.

To perform the software update of the control:

1. Download the software version from the Internet

2. Switch off the machine at the main switch.

3. Plug the USB key into the socket (1) on the control (2).

Fig. 1: Performing a software update

(1) - Connection

4. Switch on the machine at the main switch.

 The machine automatically starts the software transfer. During the

 As soon as the software update is finished, the display will also show

Conversion

(www.duerkopp-adler.com) and save it to a USB key.

①

data transfer, the display only shows the firmware version of the

control panel on the left side.

the software version of the machine on the right.

②

(2) - Control

Additional Instructions 867-M PREMIUM - 03.0 - 10/2018

Conversion

Table of Contents