Table of Contents
Advertisement
86
Symbol
Meaning
Stitch length of the current seam section
Value range: 3.0 – 6.0 mm
• Use
• Use
Needle thread tension of the current seam section
Value range: 1 – 99
• Use
• Use
◄/►
9.
Use
to switch to the
▲/▼
10. Use
or the numeric buttons to adjust the value.
Adjusting additional parameters in the seam section menu
You can adjust the following parameters for the current seam
section:
Symbol
Description
Stitch counter (StitchCount)
Enter the desired number of stitches for the seam section
• Value: 0000-9999
Hook thread tension (Thr.Tens.Bot)
• Setting the hook thread tension
Maximum speed (Max Speed)
• Set maximum speed
Lifting the sewing feet at the end of the seam program
(Foot Lifted)
• Switching sewing foot lifting on/off
Needle position at the end of the seam program
(Needle Up)
• Set needle up/down
Edge cutter (EdgeTrimmer)
• Activate/deactivate the edge cutter
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
/
to select the parameter.
/
to change the stitch length.
/
to select the parameter.
/
to change the needle thread tension.
/
selection.
Programming
Advertisement
Table of Contents
