Table of Contents
Advertisement
98
Deleting a new seam section
◄/►
26. Use
to switch to the
▲/▼
27. Use
to select the desired seam section.
28. To delete the current seam section, press the lower
softkey
.
Adjusting the other side L/R
29. If the seam program is supposed to be created with a left
AND a right side, use
▲/▼
30. Use
to select the other side L/R.
31. Repeat steps 7-28 as often as necessary.
Saving a new seam program
Once all seam sections are complete:
32. Press the ESC button.
The seam program is saved, and the P on the display
stops flashing.
The machine switches to automatic mode, and the newly
created seam program is selected and can be sewn right
away.
Fig. 63: Creating a new seam program on the control panel (5)
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
selection.
◄/►
to switch to the
Programming
/
selection.
Advertisement
Table of Contents
