Setting The Sewing Foot Stroke - DURKOPP ADLER 550-12-33 Operating Instructions Manual

Operation
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
To remove the lock:
1. Press the pedal to position -1.
2. Release the pedal (position 0).
 The locking button (1) disengages, canceling the lock.

4.11 Setting the sewing foot stroke

The sewing foot stroke is adjustable over a range of 2-7 mm by
turning the adjusting wheel.
The increased sewing foot stroke can be switched on and off using
the left button ( p. 54).
Fig. 32: Setting the stroke height
(1) - Adjusting wheel
To set the sewing foot stroke:
1. Set the sewing foot stroke:
• Increase the sewing foot stroke Turn the adjusting
wheel (1) counterclockwise
• Reduce the sewing foot stroke: Turn the adjusting
wheel (1) clockwise
 The marking (2) indicates the selected stroke height.
①
②
(2) - Marking
49