Table of Contents
Advertisement
102
▲/▼
10. Use
to select the desired seam section.
11. To add additional seam sections, press the upper softkey
12. To delete the current seam section, press the button
Exiting edit mode
13. To exit edit mode, press the ESC button.
The seam program is saved.
The machine switches to automatic mode, and the edited
seam program is selected and can be sewn right away.
5.6.4
Editing existing sewing sections
The seam sections of existing seam programs can be edited in
edit mode at any time.
Important
These changes ONLY apply to the current seam section rather
than the entire seam program.
To adjust the current seam section of an existing seam program:
1.
Switch to edit mode ( p. 90).
◄/►
2.
Use
to switch to the
▲/▼
3.
Use
to select the desired seam section.
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Programming
selection.
.
.
Advertisement
Table of Contents
