At+Cgact Pdp Context Activate Or Deactivate - Quectel M35 Command Manual

The following parameters are defined in GSM 03.60.
<precedence> A numeric parameter which specifies the precedence class
<delay> A numeric parameter which specifies the delay class
<reliability> A numeric parameter which specifies the reliability class
<peak> A numeric parameter which specifies the peak throughput class
<mean> A numeric parameter which specifies the mean throughput class

10.5. AT+CGACT PDP Context Activate or Deactivate

AT+CGACT PDP Context Activate or Deactivate
Test Command
AT+CGACT=?
Read Command
AT+CGACT?
Write Command
AT+CGACT=<state>,<cid>
Reference
GSM 07.07
Parameter
<state> Indicates the state of PDP context activation
0
1
Other values are reserved and will result in an ERROR response to the Write Command
<cid> A numeric parameter which specifies a particular PDP context definition (see +CGDCONT
command)
NOTE
If context is deactivated successfully, NO CARRIER is returned.
M35_AT_Commands_Manual
Response
+CGACT: (list of supported <state>s)
OK
Response
+CGACT:
<cid>,<state>[<CR><LF>+CGACT:<cid><state>...]
OK
Response
OK
NO CARRIER
If error is related to ME functionality:
+CME ERROR: <err>
Deactivated
Activated
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
115 / 186