At+Cfun Set Phone Functionality - Quectel M35 Command Manual

NOTES
1. Profile defined by user is stored in non volatile memory.
2. If the user profile is invalid, it will default to the factory default profile.
3. Any additional commands on the same command line are ignored.

2.18. AT+CFUN Set Phone Functionality

AT+CFUN Set Phone Functionality
Test Command
AT+CFUN=?
Read Command
AT+CFUN?
Write Command
AT+CFUN=<fun>[,<rst>]
Reference
GSM 07.07
Parameter
<fun> 0
1
4
<rst> 0
1
Example
AT+CFUN=0
+CPIN: NOT READY
OK
M35_AT_Commands_Manual
Response
+CFUN: (list of supported <fun>s), (list of supported <rst>s)
OK
Response
+CFUN: <fun>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Minimum functionality
Full functionality (Default)
Disable phone both transmit and receive RF circuits
Do not reset the ME before setting it to <fun> power level
This is default when <rst> is not given
Reset the ME before setting it to <fun> power level
// Switch phone to minimum functionality
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
26 / 186