Parameter
<status>
255
0
1
2
4.9. AT+QSIMDET Switch on or off Detecting SIM Card
AT+QSIMDET Switch on or off Detecting SIM Card
Test Command
AT+QSIMDET=?
Read Command
AT+QSIMDET?
Write Command
AT+QSIMDET=<mode>[,<active>]
Reference
Parameter
<mode>
0 Switch off detecting SIM card
1 Switch on detecting SIM card
<active>
0 Low level of SIM_PRESENCE pin indicates SIM card is present
1 High level of SIM_PRESENCE pin indicates SIM card is present
M35_AT_Commands_Manual
Not ready to retrieve network status
Work in normal state
No available cell
Only limited service is available
Response
+QSIMDET: (0,1),(0,1)
OK
Response
+QSIMDET: <mode>,<active>
OK
Response
OK
ERROR
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
45 / 186