11.27. AT+QISHOWLA Control Whether or not to Display Local IP
Address
AT+QISHOWLA Control Whether or not to Display Local IP Address
Test Command
AT+QISHOWLA=?
Read Command
AT+QISHOWLA?
Write Command
AT+QISHOWLA=<mode>
Reference
Parameter
<mode>
A numeric parameter indicates whether to show the destination address before the
received data or not
0
1
NOTE
Because M35 can activate two GPRS contexts at the same time. i.e. M35 can get two local IP addresses.
It is necessary to point out the destination of the received data when two GPRS contexts have been
activated at the same time.
11.28. AT+QIFGCNT Select a Context as Foreground Context
AT+QIFGCNT Select a Context as Foreground Context
Test Command
AT+QIFGCNT=?
Read Command
M35_AT_Commands_Manual
Response
+QISHOWLA: (list of supported <mode>s)
OK
Response
+QISHOWLA: <mode>
OK
Response
OK
ERROR
DO NOT show the destination address
Show the destination address: TO:<IP ADDRESS>
Response
+QIFGCNT: (list of supported <id>s)
OK
Response
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
146 / 186