At+Cgreg Network Registration Status - Quectel M35 Command Manual

Parameter
<mode> 0
1
NOTE
Unsolicited Result Codes supported:
+CGEV: NW DEACT <PDP_type>, <PDP_addr>[,<cid>]
+CGEV: ME DEACT <PDP_type>, <PDP_addr>[,<cid>]
+CGEV: NW DETACH
+CGEV: ME CLASS <class>
Parameters
<PDP_type> Packet Data Protocol type (see +CGDCONT command)
<PDP_addr> Packet Data Protocol address (see +CGDCONT command)
<cid> Context ID (see +CGDCONT command)
<class> GPRS mobile class (see +CGCLASS command)

10.10. AT+CGREG Network Registration Status

AT+CGREG Network Registration Status
Test Command
AT+CGREG=?
Read Command
AT+CGREG?
Write Command
AT+CGREG=[<n>]
Reference
GSM 07.07
Parameter
<n> 0
1
M35_AT_Commands_Manual
Buffer unsolicited result codes in the MT; if MT result code buffer is full, the oldest
one can be discarded. No codes are forwarded to the TE
Discard unsolicited result codes when MT-TE link is reserved (e.g. in on-line data
mode); otherwise forward them directly to the TE
Response
+CGREG: (list of supported <n>s)
OK
Response
+CGREG: <n>,<stat>[,<lac>,<ci>]
OK
Response
OK
ERROR
Disable network registration unsolicited result code
Enable network registration unsolicited result code +CGREG:<stat>
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
119 / 186