At+Qilport Set Local Port - Quectel M35 Command Manual

NOTES
1. Except at the status of IP INITIAL, you can deactivate GPRS/CSD PDP context by AT+QIDEACT.
After closing the connection, the status becomes to IP INITIAL.
2. CSD context is not supported at present.

11.5. AT+QILPORT Set Local Port

AT+QILPORT Set Local Port
Test Command
AT+QILPORT=?
Read Command
AT+QILPORT?
Write Command
AT+QILPORT=<mode>,<port>
Reference
Parameter
<mode> A string parameter which indicates the connection type
"TCP"
"UDP"
<port> 0-65535 A numeric parameter which indicates the local port
NOTES
This command is used to set the port for listening.
M35_AT_Commands_Manual
Response
+QILPORT: (list of supported <port>s)
OK
Response
<mode>: <port>
<CR><LF><mode>: <port>
OK
Response
OK
ERROR
TCP local port
UDP local port
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
127 / 186