At+Csdh Show Sms Text Mode Parameters - Quectel M35 Command Manual

Parameter
<mode> 0
1
<mids> String type; all different possible combinations of CBM message identifiers (refer to <mid>)
(default is empty string)
e.g. "0,1,5,320-478,922"
<dcss> String type; all different possible combinations of CBM data coding schemes (refer to
<dcs>) (default is empty string)
e.g. "0-3,5"
NOTE
The Command writes the parameters in NON-VOLATILE memory.

8.16. AT+CSDH Show SMS Text Mode Parameters

AT+CSDH Show SMS Text Mode Parameters
Test Command
AT+CSDH=?
Read Command
AT+CSDH?
Write Command
AT+CSDH=[<show>]
Reference
GSM 07.05
Parameter
<show> 0
1
M35_AT_Commands_Manual
Message types specified in <mids> and <dcss> are accepted
Message types specified in <mids> and <dcss> are not accepted
Response
+CSDH: (list of supported <show>s)
OK
Response
+CSDH: <show>
OK
Response
TA determines whether detailed header information is shown
in text mode result codes.
OK
Do not show header values defined in commands +CSCA and +CSMP (<sca>,
<tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or <tooa> in
+CMT, +CMGL, +CMGR result codes for SMS-DELIVERs and SMS-SUBMITs in
text mode
Show the values in result codes
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
100 / 186