Quectel M35 Command Manual page 138

Execution Command
AT+QISERVER
Write Command
AT+QISERVER=<type>[,<max>]
Reference
Parameter
<mode> 0
1
<num> The number of clients that have been connected in. The range is 1~5
<type> A numeric indicates the type of the server
0
1
<max> The maximum number of clients allowed to connect in. The default value is 1. The range
is 1-5
NOTES
1. This command configures the module as a TCP server and the maximum allowed client is 1.
2. The parameter <max> is excluded when QIMUX is 0.
M35_AT_Commands_Manual
OK
Response
OK
ERROR
If configured as server successfully, return:
SERVER OK
If configured as server unsuccessfully, return:
CONNECT FAIL
Response
OK
ERROR
If configured as server successfully, return:
SERVER OK
If configured as server unsuccessfully, return:
CONNECT FAIL
NOT configured as server
Configured as server
TCP server
UDP server
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
138 / 186