At+Qird Retrieve The Received Tcp/Ip Data - Quectel M35 Command Manual

<sc>
A numeric points out the role of M35 in the connection for the received data.
1
2
<sid> A numeric indicates the index of the connection for the received data. The range is 0-5
When QIMUX was set as 0 by the command AT+QIMUX=0, this parameter will be always
0.

11.31. AT+QIRD Retrieve the Received TCP/IP Data

AT+QIRD Retrieve the Received TCP/IP Data
Test Command
AT+QIRD=?
Write Command
AT+QIRD=<id>,<sc>,<sid>,<len>
Reference
Parameter
<id> A numeric points out which context the connection for the received data is based on.
Please refer to the parameter <id> in the command AT+QIFGCNT. The range is 0-1
<sc>
A numeric points out the role of M35 in the connection for the received data
1
2
<sid> A numeric indicates the index of the connection for the received data. The range is 0-5.
When QIMUX was set as 0 by the command AT+QIMUX=0, this parameter will be always
0
<len> The maximum length of data to be retrieved. The range is 1-1500
<ipAddr> The address of the remote end. It is a dotted-decimal IP
<port> The port of the remote end
<type> An alpha string without quotation marks indicates the transport protocol type
TCP
M35_AT_Commands_Manual
AT+QIRD<id> A numeric points out which context the connection for the received
data is based on. Please refer to the parameter <id> in the command
AT+QIFGCNT. The range is 0-1
The module serves as the client of the connection
The module serves as the server of the connection
Response
+QIRD: (list of supported <id>s),(list of supported <sc>s),(list
of supported <sid>s),(list of supported <len>s)
OK
Response
[+QIRD:
<ipAddr>:<port>,<type>,<length><CR><LF><data>]
OK
ERROR
The module serves as the client of the connection
The module serves as the server of the connection
the transport protocol is TCP
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
149 / 186