At+Qtemp Set Temperature Detection Mode Or Query Temperature - Quectel M35 Command Manual

14.3. AT+QTEMP Set Temperature Detection Mode or Query
Temperature
AT+QTEMP Set Critical Temperature Operating Mode or Query Temperature
Test Command
AT+QTEMP=?
Read Command
AT+QTEMP?
Write Command
AT+ QTEMP=<mode>
Reference
Parameter
<mode>
<Temperature>
M35_AT_Commands_Manual
Response
+QTEMP: (list of supported <mode>s), (list of supported <
Temperature>s)
OK
Response
QTEMP: <mode><Temperature>
OK
Response
OK
ERROR
0 Disable to query temperature
1 Enable to query temperature
Reserved
2
Range is from -40°C ~ +90°C.
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
178 / 186