At+Qidnsgip Query The Ip Address Of Given Domain Name - Quectel M35 Command Manual

Write Command
AT+QIDNSCFG=<pri_dns>[,<sec_dns
>]
Reference
Parameter
<pri_dns> A string parameter which indicates the IP address of the primary domain name server
<sec_dns> A string parameter which indicates the IP address of the secondary domain name server
NOTES
1. Because TA will negotiate to get the DNS server from GPRS/CSD network automatically when
activating GPRS/CSD context, it is STRONGLY recommended to configure the DNS server at the
status of IP GPRSACT, IP STATUS, CONNECT OK and IP CLOSE if it is necessary.
2. CSD function and configuration are not supported currently.

11.13. AT+QIDNSGIP Query the IP Address of Given Domain Name

AT+QIDNSGIP Query the IP Address of Given Domain Name
Test Command
AT+QIDNSGIP=?
Write Command
AT+QIDNSGIP=<domain name>
Reference
Parameter
<domain name> A string parameter which indicates the domain name
<IP address> A string parameter which indicates the IP address corresponding to the domain name
M35_AT_Commands_Manual
SecondaryDns: <sec_dns>
OK
Response
OK
ERROR
Response
OK
Response
OK
ERROR
If succeeds, return:
<IP address>
If fails, return:
ERROR: <err>
STATE: <state>
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
134 / 186