Quectel M35 Command Manual page 142

Execution Command
AT+QISCON
Reference
Parameter
<mode> See AT+QIDNSIP
<sendprompt> See AT+QIPROMPT
<iphead> See AT+QIHEAD
<srip> See AT+QISHOWRA
<csgp> See AT+QICSGP
<apn> See AT+QICSGP
<gusr> See AT+QICSGP
<gpwd> See AT+QICSGP
<timeout> See AT+QICSGP
<cnum> See AT+QICSGP
<cusr> See AT+QICSGP
<cpwd> See AT+QICSGP
<crate> See AT+QICSGP
The following four parameters are only for transparent transfer mode.
<nmRetry> See AT+QITCFG
<waitTm> See AT+QITCFG
<sendSz> See AT+QITCFG
<esc> See AT+QITCFG
NOTES
1. The execution command TA saves TCPIP Application Context which consists of the following AT
Command parameters, and when system is rebooted, the parameters will be loaded automatically:
AT+QIDNSIP,AT+QIPROMPT,AT+QIHEAD,AT+QISHOWRA, AT+QICSGP, AT+QITCFG.
2. The execution command only save the corresponding parameters of the foreground context (refer to
M35_AT_Commands_Manual
CSD Config UserId:<cusr>
CSD Config Password:<cpwd>
CSD Config rate:<crate>
App Tcpip Mode:<mode>
In Transparent Transfer Mode
Number of Retry:<nmRetry>
Wait Time:<waitTm>
Send Size:<sendSz>
esc:<esc>
OK
Response
OK
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
142 / 186