At+Qextunsol Enable/Disable Proprietary Unsolicited Indications - Quectel M35 Command Manual

Read Command
AT+QIURC?
Write Command
AT+QIURC=<mode>
Reference
Parameter
<mode> 0
1
NOTE
When the module powers on and initialization procedure is over, URC "Call Ready" will be presented if
<mode> is 1.
4.6. AT+QEXTUNSOL Enable/Disable Proprietary Unsolicited
Indications

AT+QEXTUNSOL Enable/Disable Proprietary Unsolicited Indications

Test Command
AT+QEXTUNSOL=?
Write Command
AT+QEXTUNSOL=<exunsol>,<mode>
Reference
Parameter
<exunsol> String type. Values currently reserved by the present document
"SQ"
M35_AT_Commands_Manual
OK
Response
+QIURC: <mode>
OK
Response
OK
ERROR
Disable URC presentation
Enable URC presentation
Response
+QEXTUNSOL: (list of supported <exunsol>s)
OK
Response
OK
ERROR
Signal Quality Report. Displays signal strength and channel bit error rate (similar
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
42 / 186