At+Cnmi New Sms Message Indications - Quectel M35 Command Manual

8.12. AT+CNMI New SMS Message Indications

AT+CNMI New SMS Message Indications
Test Command
AT+CNMI=?
Read Command
AT+CNMI?
Write Command
AT+CNMI=[<mode>[,<mt>[,<bm>[,<ds
>[,<bfr>]]]]]
Reference
GSM 07.05
Parameter
<mode> 0
1
2
3
<mt> (The rules for storing received SMS depend on its data coding scheme (refer to GSM 03.38
[2]), preferred memory storage (+CPMS) setting and this value):
0
M35_AT_Commands_Manual
Response
+CNMI: (list of supported <mode>s),(list of supported
<mt>s),(list
<ds>s),(list of supported <bfr>s)
OK
Response
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
OK
Response
TA selects the procedure on how the received new messages
from the network are indicated to the TE when TE is active,
e.g. DTR signal is ON. If TE is inactive (e.g. DTR signal is
OFF), receiving message should be done as specified in
GSM 03.38.
OK
If error is related to ME functionality:
ERROR
Buffer unsolicited result codes in the TA. If TA result code buffer is full, indications
can be buffered in some other place or the oldest indications may be discarded
and replaced with the new received indications
Discard indication and reject new received message unsolicited result codes
when TA-TE link is reserved (e.g. in on-line data mode). Otherwise forward them
directly to the TE
Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in
on-line data mode) and flush them to the TE after reservation. Otherwise forward
them directly to the TE
Forward unsolicited result codes directly to the TE. TA-TE link specific inband
technique used to embed result codes and data when TA is in on-line data mode
No SMS-DELIVER indications are routed to the TE
of supported
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
<bm>s),(list of supported
96 / 186