At+Cgsms Select Service For Mo Sms Messages - Quectel M35 Command Manual

2
<stat> 0
1
2
3
4
5
<lac> String type; two byte location are a code in hexadecimal format (e.g. "00C3" equals 195 in
decimal)
<ci> String type; two bytes cell ID in hexadecimal format
NOTE
For parameter state, options of 0 and 1 are supported only.
Example
AT+CGATT=0
NO CARRIER
+CGREG: 0,"1878","0873"
AT+CGATT=1
OK
+CGREG: 2,"1878","0873"
+CGREG: 1,"1878","0873"

10.11. AT+CGSMS Select Service for MO SMS Messages

AT+CGSMS Select Service for MO SMS Messages
Test Command
AT+CGSMS=?
Read Command
AT+CGSMS?
Write Command
M35_AT_Commands_Manual
Enable network registration and location information unsolicited result code
+CGREG: <stat>[,<lac>,<ci>]
Not registered, ME is not currently searching a new operator to register to
Registered, home network
Not registered, but ME is currently searching a new operator to register to
Registration denied
Unknown
Registered, roaming
Response
+CGSMS: (list of currently available <service>s)
OK
Response
+CGSMS: <service>
OK
Response
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
120 / 186