At+Cmgw Write Sms Message To Memory - Quectel M35 Command Manual

Example
AT+CMGF=1
OK
AT+CSCS="GSM"
OK
AT+CMGS="15021012496"
> This is a test from Quectel
+CMGS: 247
OK

8.9. AT+CMGW Write SMS Message to Memory

AT+CMGW Write SMS Message to Memory
Test Command
AT+CMGW=?
Write Command
1) If text mode (+CMGF=1):
AT+CMGW[=<oa/da>[,<tooa/toda>[,<s
tat>]]]
<CR> text is entered
<ctrl-Z/ESC>
<ESC> quits without sending
2) If PDU mode (+CMGF=0):
AT+CMGW=<length>[,<stat>]<CR>
PDU is given <ctrl-Z/ESC>
Reference
GSM 07.05
Parameter
<oa> GSM 03.40 TP-Originating-Address Address-Value field in string format; BCD numbers (or
GSM default alphabet characters) are converted to characters of the currently selected TE
character set (specified by +CSCS in TS 07.07);type of address given by <tooa>
<da> GSM 03.40 TP-Destination-Address Address-Value field in string format; BCD numbers (or
GSM default alphabet characters) are converted to characters of the currently selected TE
M35_AT_Commands_Manual
// Set SMS message format as text mode
// Set character set as GSM which is used by the TE
// Enter in text,<CTRL+Z> send message,<ESC> quits
without sending
Response
OK
Response
TA transmits SMS message (either SMS-DELIVER or
SMS-SUBMIT) from TE to memory storage <mem2>.
Memory location <index> of the stored message is returned.
By default message status will be set to 'stored unsent', but
parameter <stat> also allows other status values to be given.
If writing is successful:
+CMGW: <index>
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
92 / 186